Brown molten alumina is melt crystallized with high-quality bauxite at a high temperature above 2250 °C, carbon and iron As a raw material, the grinding wheel is made of abrasive brown molten alumina.
Our products It has the characteristics of high purity, good crystallinity, strong fluidity, low coefficient of linear expansion and good corrosion resistance. COuld does not burst, no crushing and CRApouch Use in the course Refractories.
index | |
Mohs hardness | 9.0 |
Bulk density | 1.53-1.99 g/cm3 |
Actual density | 3.6-3.9 g/cm3 |
melting point | 22,500 degrees Celsius |
Maximum operating temperature | 19,000 degrees Celsius |
Used for abrasive, sandblasting, grinding. | |||
performance type | 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220#. | ||
Guaranteed value | Typical value | ||
chemical composition | AI2O3 | 95.0 points | 95.65 |
silicon dioxide | Maximum 1.5 | 1.04 | |
Iron dioxide | 0.5 maximum | 0.14 | |
titanium dioxide | Maximum 3.0 | 2.20 |
1. Brown molten alumina for sandblasting and grinding of metal and non-metal products.
2. Brown molten alumina for architectural ceramics, special ceramics and technical ceramics.
3. Brown molten alumina is used for rough grinding and high pressure cutting, wear-resistant products, as additives.
4. Brown molten alumina is the raw material of resin abrasives, coated abrasives, sandpaper, gauze and other manufacturers.
Reviews
There are no reviews yet.